1. Stir well and dilute with water: 1 part BondCrete for every 10 parts water (the amount of water will depend on how much cement mix you’re making). Generally 1L of BondCrete is enough to make 20kg of cement.
2. Add the BondCrete/water mix to prepared cement or sand and mix well. Use Immediately
3. As normal, full cure will be 4 weeks.

TOPPING RENDER OR PATCHING:

1. Apply sealer coat of BondCrete (BondCrete 1: water 4) allow to dry.
2. Apply bondcoat of BondCrete (BondCrete 4: water 1) and while still wet or tacky carry out topping or patching.
3. Use BondCrete admixture (BondCrete 1: water 10) in the topping/patching mixture in place of normal water.

1. Apply sealer coat of diluted BondCrete (BondCrete 1: water 4) to surface and allow to dry.
2. Apply bondcoat of diluted BondCrete (BondCrete 1: water 1) to sealed surface and while still wet or tacky lay bedding. Beddings up to 6mm – 1 part cement: 2 part fine sand Beddings over 6mm – 1 part cement: 3 part fine sand Mixed to a workable consistency with BondCrete admix (BondCrete 1:water 4) in place of normal water.
3. Screed bedding to required level and bed the tiles immediately.

As BondCrete has a multitude of other uses, the above are some of the more common uses for Bondcrete